# Jeferson De Leon > Electronics Engineer | Embedded Systems. I turn ideas into working products: firmware, electronics, and hardware-software integration. ## Summary 6+ years in embedded systems and firmware development, and 2 years in the semiconductor industry: R&D at Innovatronix (IX), power electronics, datasheets, and app notes at Analog Devices, and embedded systems programming for new Dyson and EDMI products. ## Open to - Embedded systems, firmware, electronics, and hardware engineering roles - Client projects aligned with firmware, electronics, and connected devices ## Contact - Email: JefersonDeleon.dev@gmail.com - Website: https://jefersondeleon.dev - GitHub: https://github.com/JefersonDeLeon - LinkedIn: https://www.linkedin.com/in/jefersondeleon/ ## Experience - Firmware Engineer at EDMI Pty. Ltd. (Dec 2022 – Present) - Embedded Software Engineer at Dyson Electronics Pte. Ltd. (Sep 2021 – Dec 2022) - Product Applications Engineer at Analog Devices Inc. (Jan 2019 – Apr 2021) - Research and Development Engineer at Innovatronix (IX) (Feb 2018 – Feb 2019) - Analog Devices: Contributed to the Signal Chain Power Configurator, a design tool published on ADI's website. ## Core skills - Firmware and MCUs: C/C++, ARM Cortex-M33/M4, FreeRTOS, ESP-IDF, Bootloaders, DMA & Interrupts, Low-Power Design - Electronics and PCB: Schematic Design, PCB Layout, Hardware Bring-up, Power Systems, Motor Drivers, Debug & Test - Power & Analog: Buck/Boost, LDO, PMIC, Evaluation Board Design, Schematic Design, Bench Automation (SCPI), Python - Connectivity and IoT: MQTT, CBOR/CDDL, Wi-Fi, BLE, I2C/SPI/UART, OTA Updates - Tools and test: J-Link, GDB, Unity Test, Robot Framework, Git, CI/CD - Programming languages: C, C++, Python ## Projects A collection of projects made in the past and ones I am currently working on, from PCBs to connected devices. - ESP32 + UWB Positioning Boards: I designed ESP32 and UWB boards and wrote the firmware in ESP-IDF. Version 1.0 used a Qorvo DW3210. Version 2.0 added a DW3220 for PDoA and AoA, a Ra-02 LoRa radio, an I2C OLED, USB-serial, and JTAG. I evaluated TDoA with multiple anchors and clock sync, and PDoA-based AoA with one anchor and two antennas at lambda/2. The goal was to track a person relative to a vehicle in a no-visibility tunnel with 3 PDoA anchors and 40 tags. I ran time-of-flight ranging tests between two DW3210 boards. - IoT Device Lifecycle Framework [In progress]: This is a reusable lifecycle framework for IoT devices with limited resources. A common message format covers device identity, provisioning, telemetry, commands, remote config, heartbeat, and fail-safe OTA. The portable C99 core does not require heap or an RTOS. You can select features at compile time. ESP-IDF is the first reference platform. The design uses transport and platform abstractions. - EDMI NEOS Smart Meters: I develop and maintain production firmware for EDMI NEOS next-generation smart meters. The work includes the database, logging, and relay and tariff functions. I validate the firmware on physical hardware. The product line is published at https://www.edmi-meters.com/product-lines/neos/. - Dyson WashG1 Wet Floor Cleaner: I worked on the device UI and bootloader integration for the Dyson WashG1 wet floor cleaner. This work was part of my Embedded Software Engineer role at Dyson Electronics Pte. Ltd. from September 2021 to December 2022. The product page is published at https://www.dyson.com/floor-cleaners/wet/washg1. - Carwash Vendo Timer (ESP32) [Maintaining]: Firmware for a five-bay carwash vendo timer on one ESP32: each bay has its own coin slot, relay, timer, button, LED, and float switch, with five PCNT coin counters and a PCF8575 I2C expander driving buttons, LEDs, buzzer, and floats. Compile-time choice of a shared I2C LCD or five TM1637 seven-segment displays; per-bay rate, time, name, pause limit, and extend settings. Tank-empty floats auto-pause a bay; power-fail detection turns all relays off; credits expire. Telegram sales notifications via a FreeRTOS queue, an HTTP admin panel for sales, settings, and dual-partition firmware updates, plus Wi-Fi offline fallback so bays keep running. Sales and settings persist as JSON on LittleFS with license activation. - Heater and Fan Control Board: This is a heater and fan control board. It has safety interlocks for tip-over, thermal (70-80°C), and slot insert. It has a 30-second fan delay and a 4-hour timer. Version 1.1 added a CD4098. An electromechanical relay was preferred over an SSR. The design steps 220 V down to 12 V to drive a 12 V 50 W PTC heater. I did circuit design and PCB work on the V1.0 and V1.1 revisions. - Signal Chain Power Configurator: This is an Analog Devices software tool for planning signal-chain power. The work included software development for the configurator and product applications engineering on the hardware side. The tool is published at https://www.analog.com/en/design-center/signal-chain-power-configurator-tool.html. The work covered the tool banner and UI, bench validation hardware, and trade-show demos. - RFID & QR Gym Door Access (ESP32 + MQTT) [Maintaining]: Door access firmware runs on an ESP32 with PlatformIO. An MFRC522 RFID reader and a QR reader feed a local card database on LittleFS. MQTT with PubSubClient sends scans and lock commands to a cloud gym management system. The system validates members and replies with open or denied. Per-branch topics publish card scans. They also receive remote commands to add, remove, check, and clear cards. The MCU drives a door-lock relay, an exit button, a buzzer, and LED feedback. Wi-Fi provisioning uses AutoConnect. A pinned FreeRTOS task runs the control loop. License activation and serial commands set up Wi-Fi, MQTT, and the branch ID. - Badminton Court Lighting Automation: A Raspberry Pi hosts an MQTT broker and the control logic for a badminton court management system. The Pi controls Philips Hue Zigbee lights through the Hue Bridge API. A Sonoff Zigbee 3.0 USB Dongle is the Zigbee coordinator. Other light controllers are RFM69 sub-GHz radio nodes that are bridged to MQTT. - IXduino: This is an Innovatronix Inc. universal board for customized projects, from June 2018. The work included schematic and PCB layout design. - Solar-Powered Pedestrian Traffic Light: This is a custom solar-powered pedestrian traffic light, from August 2018. The work included programming and circuit design. The photos show an installed outdoor signal, an LED signal head, and a controller paired with a tablet. - SANI-POD: This is a self-contained disinfecting cubicle. I worked as Science Research Specialist II on circuit and PCB design, program flow, and automation of the control system in June 2021. The photos include control electronics and product renders. - Laundry Wireless Controllers: This is a laundry shop washing machine and dryer wireless controller and inventory system from 2018. The photos show controller boards and an installed washer and dryer row. - Production Counters: These are customized and wireless production counters with Plan/Actual and Target/Actual displays. I was the project engineer on the customized Production Counter work in June and September 2018. I was also the project engineer on the Wireless Production Counter in April 2018. - Digital NTP Clock and Temperature Display: This is a customized digital NTP clock and temperature display, from September 2018. Project engineering covered the front display and the internal electronics. - RGBW LED Controller over MQTT: An ESP8266 RGBW controller is driven over MQTT. Four PWM channels mix color. The broker connection includes reconnect logic. The topic scheme works with home-automation systems. - Auto-Login Piso Wi-Fi Vendo (ESP8266 + MikroTik): This firmware connects a coin-operated vendo machine to a MikroTik router. The ESP8266 detects coin pulses. It then automates the hotspot login and credit flow on the router. Paying customers get online without manual vouchers. - Queuing System: This is a queuing system from 2018. The project engineering focused on software. The deployment photos include a kiosk and service-counter displays. - Multifunction Digital Clock: This is a multifunction digital clock from April to May 2018. The photos show stacked production display units and rear views of assembled production builds. - PCB Coaster, Git Cheat Sheet and Embedded Skills Tracker: This desk coaster is a real PCB. One side is a Git command cheat sheet. The other side is a progress checklist for embedded systems skills. You can fill the solderable pads as you complete skills. The coaster was designed and fabricated as functional PCB art. ## What I do Firmware, electronics, and connected devices, from idea to working hardware. - Firmware & Embedded Systems: Production-grade firmware on ARM Cortex-M: bootloaders, RTOS task management, peripheral drivers (DMA, UART, I2C, SPI), and low-power optimization. From bring-up through validation on real hardware. - Hardware, Power & Electronics: Schematic design, power IC selection and evaluation (buck/boost, LDO, PMIC), PCB layout supervision, and hardware bring-up. I debug at the bench with a scope and logic analyzer, so issues are caught before production. - Connected Devices & IoT: End-to-end IoT products: MQTT integration, CBOR protocols, OTA update infrastructure, and connected-device lifecycle from provisioning through telemetry and remote config. ## Who I am - I understand the power and analog side the firmware runs on, so I catch problems at the bench, not in the field. - I'm an electronics engineer who works from the circuit up. I started my professional career at Innovatronix (IX), designing MCU-based controllers and their PCBs and writing the firmware that ran on them. - At Analog Devices I spent two years in the semiconductor industry, working as a product applications engineer in power electronics. I designed evaluation boards for new buck/boost, LDO, and PMIC products, contributed to the Signal Chain Power Configurator, a design tool published on ADI's website, and automated bench testing, which earned me 5 Spot Awards. - Since then I've focused on firmware: device UI and bootloader integration at Dyson, and today new features for next-generation smart meters at EDMI. - I've been an electronics enthusiast since 2015. Outside work, I keep learning by building things that interest me, from PCBs to connected devices. ## Hero phrases - I design electronics and power circuits. - I write firmware that ships. - I bring up and debug real hardware. - I connect devices to the cloud. - I turn prototypes into products. - I make hardware think. Canonical URL: https://jefersondeleon.dev